More than 10000 customers have ordered our products.
  • Self Cleaning Filter
  • Self Cleaning Filter
  • Self Cleaning Filter

    Self Cleaning Filter

    Various control method for different working condition.

    Continuously water supply: less water consumption in the cleaning process.

    Strong maintainability and easy to install and disassemble.

    High filtration precision: the filtering precision can reach 20 microns.

    Long service life: Normally it will be more than ten years.

    In Stock, Contact Now >>>

    Self Cleaning Filter


    The self cleaning filter has functions of automated cleaning and drainage. It can be controlled by pressure difference, time or manual. There are many advantages, including high filtration precision, short self-cleaning time, low cleaning water consumption, and small pressure loss.

    Self Cleaning Filter Self Cleaning Filter

    JX self cleaning filter comprises the drive motor, actuator, electric controller, control pipeline, filter body, coarse filter element, fine filter element, inlet, outlet connection flange, and other main parts. And we have brush type, scraper type, hydraulic type self cleaning filter.

    Self Cleaning Filter Self Cleaning Filter

    Best Factory, Best Product. Contact Now !!!

    Working Principle

    The water flows through the screen, and the particles are retained on the screen of the filter element. The filtered water flows out through the outlet. When the particles accumulated to a certain number and the pressure differential increases to the pre-determined level, the flushing cycle starts.

    It includes two steps: first, the automatic drain valve opens on the drainage outlet. The electronic motor then drives the cleaning brushes inside the screen, and the solids are expelled through the drain valve. Filters continue to supply filtered water when backwashing. The whole working system is controlled by a controller with several control modes: pressure differential, time, manual, and PLC.

    Self Cleaning Filter
    • The filter precision ranges from 10 to 3000 microns with large filter area and the high treatment capacity.
    • The cleaning method is simple and monitored electronically to achieve automatic cleaning and discharge.
    • Equipped with motor overload protection, which can effectively protect the motor.
    • Strong maintainability, easy to install and disassemble.
    • Strong versatility:connected with customer's pipeline by international standard flanges.
    Technical Parameters
    Flow RateUp to 4000m3/h
    Filter Rating40-4000um
    Cartridge Perforated screen (800-4000um)
    Woven wire screen (20-800um)
    Wedge wire screen (50-1000um)
    Working Pressure 0.18-1.6 Mpa (solenoid diaphragm valve)
    Working Tem. ≤95 ℃
    Turbidity ≤60mg/L
    Power Supply 380V/50Hz or as required by the customer
    Voltage AC24V or as required by the customer
    Cleaning Mode Brush, scraper, etc.
    Cleaning Time 10-200s, adjustable
    Control Mode Pressure difference/time/manual/PLC
    • Water Treatment
    • Petrochemical
    • Metallurgy
    • Electric Power
    • Chemical
    • Paint & Printing Ink
    • Paper
    • Food & Beverage
    • Pharmaceutical
    • Metal Processing Industries, etc.

    Self Cleaning Filter PDF Download

    Self Cleaning Filter

    Our Service

    Professional Pre-sale

    Filtration method and
    equipment recommendation


    Free CAD or 3D
    drawing provided


    Free phone call

    Complete Service
    During Sales

    On time delivery


    Equipment inspection
    by photo or video


    Secure and standard
    package provided

    After Sales Service

    Installation assist by
    phone call or video


    Free accessories provide
    for maintenance


    Engineer sent for
    solving onsite problem

    Self Cleaning Filter


    Where is your factory?

    We have three factories in Sichuan, Hebei, Jiangsu. Because the difference of customer locations, raw material price, factory wages and other considerations. In this way, we can provide the best quality product with lower cost.

    Do you have a certification?

    Yes. we have ISO/CE/BV/SGS/TUV certificate and patent certificate.

    How about the delivery time?

    Usually 1-15 days after prepayment is confirmed.

    Do you have a design team?

    Yes, we have. Providing drawing, electric drawing and others.

    What is your payment?

    T/T, L/C, Western Union, Paypal.

    Can you provide certificate of origin?

    yes, we can provide CO as well as FORM E, FOEM F and etc.

    Can you accept OEM?

    Yes, we could do OEM for you.

    Can you send me a sample?

    Yes.1-3 days for delivery.

    Refund immediately if not satisfied.