More than 10000 customers have ordered our products.
  • Brush Self Cleaning Filter
  • Brush Self Cleaning Filter
  • Brush Self Cleaning Filter

    Brush Self Cleaning Filter

    Large treatment capacity up to 5000m3/h.

    High standard stainless steel brush.

    Low cleaning water consumption.

    More than 10 years service life.

    Over 3000 sets sold each year.

    In Stock, Contact Now >>>

    Brush Self Cleaning Filter


    Brush self cleaning filter can filter the raw water, clean and discharge the filter element automatically. Compared with the previous filters, the equipment has high degree of automation and a larger capacity. It has uninterrupted water supply and a wide range of applications.

    Brush Self Cleaning Filter Brush Self Cleaning Filter

    The brush self cleaning filter comprises the drive motor, actuator, electric controller, control pipeline, filter body, coarse filter element, fine filter element, inlet, outlet connection flange, and other main parts. It is widely used in water treatment, paper-making, petroleum, bio-pharmaceuticals, printing ink, grease, food and beverage, etc.

    Brush Self Cleaning Filter Brush Self Cleaning Filter

    Best Factory, Best Product. Contact Now !!!

    Working Principle

    The water flows through the screen, and the particles are retained on the screen of the filter element. The filtered water flows out through the outlet. When the inlet and outlet's differential pressure reaches the preset value, the filter will start the self-cleaning process. The whole self-cleaning process contains two steps: open the drain valve on the filter's end cover.

    The motor drives the two stainless steel brushes in the filter mesh, then the impurities captured by the filter mesh will be brushed down by the steel brush and discharged from the drain valve. The whole cleaning process takes about 15 to 60 seconds. During this time, the filtration system does not stop, and a control box controls the entire operation process.

    Brush Self Cleaning Filter
    • The filter precision ranges from 10 to 4000 microns.
    • Equipped with motor overload protection, which can effectively protect the motor.
    • Stainless steel brush with good impurity removing performance avoiding impurities extruding and breaking.
    • Connected with customer's pipeline by international standard flanges.
    • Continuously water supply: water consumption in the cleaning process is less, nearly 5% of filter water yield.
    General Parameters
    • Operation flow rate: 20-5000m3/h
    • Min working pressure: 2bar
    • Max working pressure: 10bar/150psi
    • Filtering area: 3000cm2-20000cm2
    • Inlet/outlet diameter: 50/80/100/150/200/250/300/350/400 /500/600/800mm
    • Max working temperature: 50°C
    • Drain valve Size:25mm/50mm/80mm
    • Cleaning time:30-60S
    • Cleaning water consumption(every time):≤1%
    Technical Parameters
    Model Pipe Diameter
    Flow Rate
    Flow Area
    Drain Valve
    Filtration Rating
    Motor Power
    JXBTA-21950 20 0.27 250.01-50.55
    JXBTA-27380 50 0.25 250.01-50.55
    JXBTA-325100 150 0.35 250.01-50.55
    JXBTA-426200 300 0.66 500.01-50.55
    JXBTA-530250 500 1.6 500.01-50.55
    JXBTA-630300 700 0.85 800.01-50.75
    JXBTA-720350 1100 1.3 800.01-50.75
    JXBTA-820400 1500 1.4 800.01-50.75
    JXBTA-920450 1700 1.8 800.01-50.75
    JXBTA-1020500 2000 2.2 800.01-50.75
    • Water Treatment
    • Petrochemical
    • Metallurgy
    • Electric Power
    • Chemical
    • Paint & Printing Ink
    • Paper
    • Food & Beverage
    • Pharmaceutical
    • Metal Processing Industries, etc.

    Self Cleaning Filter PDF Download

    Brush Self Cleaning Filter

    Our Service

    Professional Pre-sale

    Filtration method and
    equipment recommendation


    Free CAD or 3D
    drawing provided


    Free phone call

    Complete Service
    During Sales

    On time delivery


    Equipment inspection
    by photo or video


    Secure and standard
    package provided

    After Sales Service

    Installation assist by
    phone call or video


    Free accessories provide
    for maintenance


    Engineer sent for
    solving onsite problem

    Brush Self Cleaning Filter


    Where is your factory?

    We have three factories in Sichuan, Hebei, Jiangsu. Because the difference of customer locations, raw material price, factory wages and other considerations. In this way, we can provide the best quality product with lower cost.

    Do you have a certification?

    Yes. we have ISO/CE/BV/SGS/TUV certificate and patent certificate.

    How about the delivery time?

    Usually 1-15 days after prepayment is confirmed.

    Do you have a design team?

    Yes, we have. Providing drawing, electric drawing and others.

    What is your payment?

    T/T, L/C, Western Union, Paypal.

    Can you provide certificate of origin?

    yes, we can provide CO as well as FORM E, FOEM F and etc.

    Can you accept OEM?

    Yes, we could do OEM for you.

    Can you send me a sample?

    Yes.1-3 days for delivery.

    Refund immediately if not satisfied.