Volute Press
Screw Press
Sludge Press
Dewatering Press
Screw filter Press
Volute Dewatering
Dewatering Screw
Dewatering Machine
Screw Press Dewatering
Dewatering Equipment
Volute Dewatering Press
Sludge Dewatering Press
Sludge Machine
Sludge Screw Press
Volute Screw Press
Sludge Press Machine
Industrial Screw Press
Wastewater Screw Press
Sludge Dewatering Press 131
Sludge Dewatering Press 251
Sludge Dewatering Press 301
Sludge Dewatering Press 351
Sludge Dewatering Press 401
Sludge Dewatering Press 404
- 1
- 2
- 3
Screw Press Dewatering
Widely applied in many industries sludge treatment.
Not easy to block and reduce the cleaning water consumption.
24 hours automatic operation without any human intervention.
Indurative stainless steel frame: long service life.
Low-speed operation, no noise, low energy consumption.
Screw Press Dewatering
Description
JX Screw Press Dewatering can dehydrate the sludge in the thickening tank to achieve sudge reduction and saving the discharge cost of hazardous waste. The resulting moisture content of the sludge is about 75%-85%.
The sludge is squeezed and dehydrated by a screw press dewatering machine, and the volume reduced to 1/10 of the original. Sludge converts from liquid to solid, which is conducive to transportation and consumption, to meet the treatment standard of sludge resource utilization and stabilization.
Best Factory, Best Product. Contact Now !!!
Working Principle
When the equipment is running, the sludge enters the filter cartridge from the feed port and is pushed by the screw shaft rotating blades to move to the discharge port. As the pitch between the screw shaft rotating blades is gradually reduced, the pressure on the sludge is also followed.
It continues to increase, and dehydration starts under the action of the pressure difference. The water flows out from the filter gap between the fixed ring and the movable ring. At the same time, the equipment relies on the self-cleaning function between the fixed plate and the movable plate to clean the filter gap to prevent clogging, and the mud cake passes through. After being fully dehydrated, it will be discharged from the discharge port under the push of the screw shaft.
- The unique dynamic and static disc structure makes it is not easy to block.
- Adopting an automatic control system to drive the control cabinet, dosing device, sludge pump and dosing pump.
- Low operating speed, only 2-4 r/min, power consumption is only 0.01-0.1kwh/kg-s.
- Saving investment in the construction of mixers, air compressors, flushing pumps and other supporting equipment.
- The sludge is dewatering under the aerobic standard, and it is not easy to release the sludge phosphorus.
- Municipal wastewater
- Food
- Beverages
- Slaughtering and breeding
- Printing
- Petrochemical engineering
- Paper making
- Tannery
- Pharmaceutical,etc.
Screw Press Dewatering
Related Cases
Screw Press Dewatering
Related Product
Sieve Bend Filter
Sieve Bend is a simple mechanical filter. The filter surface has a curved or slanted surface. It has the simplest structure with high filter precision and easy to operate and clean.
Dewatering Machine
Dewatering Machine is specially designed to extract juice from fruits and vegetables with high fiber content, such as grapes, sand acorn, pomegranate, ginger, spinach, etc. It is also used for the dehydration of household garbage, food waste and drug residue.
Rotary Drum Screen
It is suitable for separating the small suspended substances (hair, pulp fiber, fine particles) existing in the liquid to achieve the purpose of solid and liquid separation.
Dissolved Air Flotation
It is a widely-used solid-liquid separation equipment in wastewater treatment industry. It can effectively remove the suspensions, oils, and adhesives in the wastewater. It can remove the floated flocs that are difficult to precipitate.
Screw Press Dewatering
Our Service
Professional Pre-sale
Service
Filtration method and
equipment recommendation
Free CAD or 3D
drawing provided
Free phone call
Complete Service
During Sales
On time delivery
Equipment inspection
by photo or video
Secure and standard
package provided
After Sales Service
Installation assist by
phone call or video
Free accessories provide
for maintenance
Engineer sent for
solving onsite problem
Screw Press Dewatering
FAQ
Where is your factory?
We have three factories in Sichuan, Hebei, Jiangsu. Because the difference of customer locations, raw material price, factory wages and other considerations. In this way, we can provide the best quality product with lower cost.
Do you have a certification?
Yes. we have ISO/CE/BV/SGS/TUV certificate and patent certificate.
How about the delivery time?
Usually 1-15 days after prepayment is confirmed.
Do you have a design team?
Yes, we have. Providing drawing, electric drawing and others.
What is your payment?
T/T, L/C, Western Union, Paypal.
Can you provide certificate of origin?
yes, we can provide CO as well as FORM E, FOEM F and etc.
Can you accept OEM?
Yes, we could do OEM for you.
Can you send me a sample?
Yes.1-3 days for delivery.
