India+Cartridge Filter+Radioactive Liquid (alkaline)

September 30, 2022 India

Product: Cartridge Filter

Country: India

Application: Radioactive liquid (alkaline)

Cartridge filter: It is composed of stainless steel housing and filter element. It is widely used in industries. The raw water flows from the outside to the inside through the filter element, and the granular impurities in the raw water are trapped on the surface of the filter element, so as to achieve the purpose of filtration and purification. Filter material: natural cotton, polyester, polypropylene, nylon, etc. Type of filter element: wound, melt blown, folding, etc. Filtration accuracy (pore size) : 0.22μm, 0.45μm, 1μm, 5μm, 10μm, 50μm, 100μm, etc. Standard for filter element replacement: when the pressure difference between upstream and downstream is greater than 0.2mpa, and the filtrate flow rate is reduced by 30% compared with the initial use, the filter element needs to be replaced.

Type: Cartridge Filter
Filtration accuracy: 20 microns
Operating temperature: 25-60 ° C
Flow rate: 0.5 m³/Hr
Operation pressure: 3 Kg/ Cm2 Max
Material: SS 304 L

Advantages:

1. Small size, light weight, reasonable structure.
2. Three stage purification treatment, long service life.
3. The maximum removal of water, oil mist, solid particles, oil mist concentration control at 0.01 PPM /wt, 100% removal of 0.01μm and above particles.

Usage precautions:

1. Before use, it is necessary to check whether the equipment is intact, whether the accessories and sealing rings are lost, and assemble according to the requirements.
2, The new filter must be cleaned with detergent before use, after cleaning, can be treated with high temperature sterilization, disinfection, and then wrapped to prevent pollution.
3. When the filter element is inserted, it must be kept in a vertical state. When it is inserted, the sealing ring can be moistened with filtrate liquid to reduce the resistance when inserted.
4. Open the exhaust valve above the filter, so that the filtered liquid can be filled into the filter, so that the filtration effect is better.
5. When filtering, the pressure used is generally about 0.1mpa, and the highest must not exceed 0.5mpa.

After-Sale Services

Quality guarantee: 12 months after the equipment having been operated.
Satisfied after-sell service: free maintenance and inspection.
Detailed installation instructions, CAD drawing and product qualification certificate.