10 Slot Water Well Screen Slot Size

In addition to water intake, the water well screen can prevent particles of soil or rock around the well wall from flowing into the well and silting up the well pipe. At the same time, it also supports and protects the well wall.

The V-shaped Water Well Screen is welded by V-shaped wedge wire and V-shaped rods (or round rods) at each intersection. It has a strong structure, high porosity and accurate gap size. It is especially suitable for fine sand and silt sand formations in water wells. The opening area of the water filter pipe is large, which can reach 60%.

The V-shaped Water Well Screen is easy to backwash and has a long service life with low overall cost. The larger filter area makes it easier for groundwater to penetrate into the well, thereby obtaining ample water volume, reducing the depth of the water level, and reducing energy consumption.

The larger filter area can relatively reduce the pressure when the water infiltrates, and can prevent sand particles from entering the well pipe under higher water pressure, thereby reducing the friction between sand particles and the equipment, reducing wear, and improving the service life of the equipment. 

Features

1. Precise V-shaped wedge wire, with self-cleaning function.
2. The surface is smooth and has no edges and corners, and the roundness is good.
3. The self-supporting and welding skeleton structure has high strength and high pressure bearing capacity.
4. Corrosion resistance and long service life.
5. The slot size is uniform, the Water Well Screen slot size is controlled at 20 microns, and the error is 0.005mm. Customized production can be made according to the customer's requirements.
6. The filtering direction can be adjusted according to customer requirements, from the inside to the outside or from the outside to the inside.
7. Material selection: stainless steel 304, 316L, 904L, Hastelloy.

Any requirements, contact us now!

Grace

Email:grace@filtrationchina.com

Mobile/Whatsapp/WeChat：+86 17269571160